Instructions 1. 100 levels of vibration & static. 2. The levels can be altered by use of up & down button. 3. The system can be used for1 or 2 receivers. 1. The life span of the batteries vary to how often you use the product. Therefore you should often check the batteries by hearing the beep from the Collar Receiver and watching the indicator light on the LCD screen of the Transmitter. 2. The valid distance of remote control means the straight-line distance between the Transmitter and the Collar Receiver without obstacles in between. If there are interference source around, the actual remote control distance may vary. 3. This product is for pet training only , by training,the pet can understand the intention of its owner.Desirable results can only be achieved after a period of training. 4. Training sessions should be kept positive and short, about 10-15 minutes each time. 5. Presently,this product is the most effective and safest tool for pet training. Following the correct operation instructions,you can effectively train your pet and make it a docile and adorable creature. Charge the Collar Receiver 1.Connect the charger connector to the charging jack. 2.Plug the charger into a standard outlet. 3.The red LED light inside the Collar Receiver will turn on 4. Charge the Collar Receiver at least 6 hours for the first charge. 5. After fully charged, the red LED light will be turned off automatically. 6. When charging is completed, put the rubber cover in the right position to keep the internal unit from dust and water. Low battery Indicator:the Collar Receiver will keep beeping for 2 minuets unless It gets charged. What is in the box: 1 x remote control unit 2 x collar 1 x charger&cord 2 x test light&replacement probes 1 x Operating Instructions

Amazon > Pet Supplies > Self-Service > Custom Stores > Pet Behavior Center > Barking Control

Amazon > Pet Supplies > Categories > Dogs > Training & Behavior Aids > Training Collars

PriceZombie > Pet Supplies