The PC Products PC-11 is a two-part marine epoxy adhesive paste used to bond materials in dry, wet, and underwater environments. The epoxy is made from a high-tack paste that fully cures even when submerged in water and can be used in vertical and overhead applications, as well as both indoors and outdoors. After maximum curing, the product has high strength and provides resistance to mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water. It can be painted, stained, and machined, and is nontoxic and nonconductive after it has been cured.SpecificationsWhat's in the Box?

Amazon > Industrial & Scientific > Tapes, Adhesives & Sealants > Epoxy Adhesives

PriceZombie > Industrial & Scientific

2 component epoxy paste for use in bonding, sealing, and as a filler for most materials. Can be applied to dry, wet, or underwater surface. Remains workable for 30 to 45 minutes and will not drip, sag, or shrink. Cures in 6 to 8 hours.

No. PC 11 1 2LB: 1 2 lb.

No. PC 11 1LB: 1 lb.

Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing.