Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LEDs display primary or secondary power availability. Manufacturer: Tripp Lite Manufacturer Part Number: PDUMH20ATNET Manufacturer Website Address: http://www.tripplite.com Brand Name: Tripp Lite Product Model: PDUMH20ATNET Product Name: PDUMH20ATNET PDU Switched ATS 120V 20A 16 Outlet Product Type: PDU Management: Management: Integrated Automatic Transfer Switch (ATS) allows PDU to operate from secondary input source when primary input fails Sequential outlet power-on prevents inrush-related equipment interaction on startup Programmable or real-time monitoring and outlet power control via secure web/network interface Physical Characteristics: Form Factor: Rack-mountable Physical Characteristics: Rack Height: 1U Package Contents: PDUMH20ATNET PDU Switched ATS 120V 20A 16 Outlet PDU with attached L5-20P input power cord Detachable C19 to NEMA L5-20P 12 ft/3.6m power cord for optional secondary input Two NEMA L5-20R to NEMA 5-20P plug adapters User manual with warranty information Green Compliant: Yes
TRIPP LITE 16-outlet nema 5-15/20r 20a ats metered pdu 1u - Manufacturer: Tripp Lite - Mfg Part Number: PDUMH20ATNET - Condition: New - Packaging: Retail
Tripp Lite PDUMH20ATNET Switched 1U 120V 20A 12 ft PDU with Dual-input Auto Transfer Switching Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS Complaint Input Voltage: 120V Input Connector(s): 2 NEMA L5-20P with 2 NEMA 5-20P plug adapters Output Frequency: 50/60Hz Output Watts (VA): 2400w Output Connector(s): 16 NEMA 5-15/20R Operating Relative Humidity: Up to 95% (non-condensing) Features: 1U switched PDU with digital current monitoring, network interface and 16 individually controllable outlets 20A 120V capacity with 16 NEMA 5-15/20R outlets with support for L5-20P and 5-20P input connections Connects to NEMA 5-20R and locking L5-20R receptacle Optional Auto Transfer Switch (ATS) supports a variety of advanced fault-tolerant and redundant networking applications Supports 2-7 ms. transfer between included primary and secondary line cords, even ...
Tripp Lite's 120V 20A metered PDU system with Automatic Transfer Switching (ATS) is a 16 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned-on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Installed web/network monitoring card enables remote power monitoring and control. Remotely displays status of input power, load capacity, and outlet power status via secure network or web browser interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Load ramping and shedding provides automatic power management. Supports notification and logging of input power status, event notification, output power and load conditions. Supports 1U rack mount installation in a 2 or 4 post racks. Included are 16 NEMA 5-15/20R outlets, and optional-use dual cords for auto- transfer switching (ATS) options. Each input plug supports 5-20P and L5-20P input. Tripp Lite PDUMH20ATNET PDU Switched 16 Outlet is one of many Power Distribution Units (PDUs) available through Office Depot. Made by Tripp Lite.
Tripp Lite's 120V 20A metered PDU system with Automatic Transfer Switching (ATS) is a 16 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned-on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Installed web/work monitoring card enables remote power monitoring and control. Remotely displays status of input power load capacity and outlet power status via secure work or web browswer interface. Offers individual outlet control to power on off or cycle AC output to regain control of locked-up servers and other work devices. Load ramping and shedding provides automatic power management. Supports notification and logging of input power status event notification output power and load conditions. Supports 1U rackmount installation in a 2 or 4 post racks.Primary InformationPower Device Type:Power distribution unitVoltage Provided:AC 120 V ( 50/60 Hz )Voltage Required:AC 120 VPower Provided (W):2400 VAPower Provided (VA):2400 VAPower Device / Form Factor:Rack-mountableNetworking Type:Ether 10/100Interfaces & Connections:Interfaces: 1 x management - 9 pin D-Sub (DB-9) 1 x management - RJ-45 1 x management - 8 pin mini-DIN 1 x management - 6 pin mini-DIN (PS/2 style)Input Connector(s):2 x power NEMA 5-15Output Connector(s):16 x power NEMA 5-15/20Enclosure Color:BlackWidth:17.5 InchDepth:14.5 InchHeight:1.7 InchCompliant Standards:NOM RoHSService & Support Type:2 years warrantySpecial FeatureRoHS:YUNSPSC CodeUNSPSC Cod
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to al