Akfix HT300 is a high-performance silicone sealant developed for sealing, bonding and repairing works where heat resistance is required. It is an ideal sealant for high temperature construction applications. It reacts with atmospheric moisture to produce a tough, elastic silicone. APPLICATION AREAS Sealing and bonding applications in automotive On heating systems and ovens for sealing/ tightness Sealing and bonding in stoves In heating devices Gaskets in pumps and motors In sealing chimneys Other bonding and sealing applications where parts must perform at high temperatures INSTRUCTIONS Ensure that surfaces to be sealed are clean, dry and grease free. The application temperature must be between +5 C and +40 C. After the application, the sealant must be tooled with light pressure within 5 minutes to spread the material against the joint surfaces and to obtain a professional finish. Excess uncured sealant may be cleaned with solvent. Cured sealant can be removed barely mechanically. 6 mm. joint depth is recommended for joint widths between 6 mm to 12 mm RESTRICTIONS May cause corrosion on some sensitive metals (brass, copper, zinc) and on marble and natural stones Not paintable Not appropriate for parts that are in continuous contact with fuels or surfaces that may bleed oils.

Amazon > Industrial & Scientific > Tapes, Adhesives & Sealants > Industrial Sealants > Gasket Sealants > Gasket Makers

Amazon > Automotive > Categories > Oils & Fluids > Sealers > Gasket

PriceZombie > Industrial & Scientific