Product Description

Designed to connect from eSATA port (I type) to eSATA port (I type)Cable for external useSafe Data TransferSupport speed up to 3Gb/sEMI protectionFlexible cableROHS compliant - no hazardous substances usedBackground:Serial ATA (SATA) replaces Parallel ATA (PATA, a.k.a. IDE) as the new standard for high speed, reliable data transfer between your computers motherboard and storage drives.  SATA provides faster data transfers, less clutter due to a more compact cable, leading to better in-case air circulation and ability to hot swap connections.First generation SATA is generally referred to simply as SATA, but is also known as SATA 150 or SATA 1, has a thoughput of 1.5 gbit/s.  It is an internal interface that uses "L" type connectors.  They are referred to as "L" connectors because if you look at the female connector head on, it has a sideways "L" shaped slot.  The male connector has an "L" shaped tongue.Second generation SATA is known as SATA  3 Gbps but commonly referred to as SATA 2 and sometimes SATA 300.  It supports a 3.0 Gbps transfer rate and also uses the "L" type connector.  SATA 2 cables are backward compatible with first generation SATA devices.  However, maximum throughput will be limited to the least common denominator.To go with the newer SATA interface, SATA drives usually employ a new 15 pin power connector as oppose to the older 4 pin Molex power connectors used on older system.  However, some drives will have both types of connections for ease of installation into legacy systems.Here's where it can get confusing.  For use with external devices, eSATA was developed with a completely different type of connector.  eSATA uses "I" (letter i) type connectors because, as before, if you look at the connector straight on, there is an "I" shaped slot or tongue.  Not to be confused with SATA 1 (#1) which some manufacturers will label SATA I (roman numeral i) which tends to confuse