Product Description

The B+W Filter 77mm Neutral Density 0.3-2x #101 is the lightest B+W Neutral Density Filter attenuates the light by one f-stop (log density 0.3), which can be beneficial, for instance, for the correct exposure of high-speed films when the brightness of the subject is still too high for the fastest shutter speed and the smallest aperture. It is recommended especially as a complement to B+W Neutral Density Filter 102 for fine adjustments. The filter factor is 2x. Single Coating Each glass surface is vacuum coated with one layer of Anti-Reflection coating. This single layer helps to prevent internal ghosting and reflections. It also improves light transmission from approximately 92% (uncoated glass) to over 98%. Mount This filter uses our standard B+W F-Pro filter mount, which has a front accessory thread and is made of brass. Compared to the earlier standard mount introduced in 2001, the F-Pro mount has become thinner. Now it can be used with wide angle lenses, including most 24mm focal lengths on a full frame body, without vignetting. Another advantage of the F-Pro mount is it's modified retaining ring, which is no longer threaded in from the front, but holds the filter glass in place from the back. When removing a filter or lens hood that has been screwed on too tight to the filter, the retaining ring is not at risk of loosening.