Product Description

AA-DUCT AD1 is a single component epoxy, formulated with pure silver power combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates. AA-DUCT AD1 shows slight settling when stored for a long period of time, no caking and will re disperse to a smooth homogeneous state. AA-DUCT AD1 formulation produces electrically conductive paths on a wide variety of surfaces including plastics, rubber, cloth, thermoplastic, paper, wood and many others. AA-DUCT AD1 designed for use in diversified applications as microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections, and circuitry. GENERAL PROPERTIES Appearance Silver Cure Type Heat cure Benefits High strength Perfect bond EMI & RFI shielding Wave guides Substrates Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. UNCURED PROPERTIES Viscosity At 25 C cps 6,800 Density gm/cc 2.35 Silver , % 65-75 Density gm/cc 2.35 Pot Life 6 months At 25 C 9 months At refrigerated CURE SCHEDULE 0.7 hours At 175 C 1.5 hours At 150 C 2 hours At 120 C MISC PROPERTIES Hardness, Shore D 83 Sheet Resistivity 10-12 m?/sq Lap shear strength 2000 Lb/in2 GENERAL INFORMATION This product contains organic solvent. The following precautions should be exercised Use with adequate ventilation. Avoid prolonged contact with skin, if contact with skin occurs, wash area immediately with a soap and water avoid prolonged breathing of vapor. Dangerous if swallowed. Refer to MSDS for more details. AVAILABILITY This epoxy can be supplied in various different packages.