Product Description

3053W-AALB Moveable Infrared Heat: No, Vibration and Heat: None, Upholstery: Aaron - Light brown Features: -The seat height is 22" from the floor, and the seat depth from front to back is 22". Width between the armrests is 24". The top of the armrest from the top of the seat measures 5". Backrest is 27" from top of seat. When in the reclined position the footrest is 22" from the floor and the depth from the back of the seat to the tip of the footrest measures 43".. -Magazine pocket on lower, outer right-hand side. Armrest and head covers are standard. Battery back-up system is standard. (Battery back-up system is not available with Ultra-EZZ III Massage System, or 2, 4, or 6 Vib/Heat at this time.. -The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are high quality grade 5. All bolts go entirely through the wood. No lag screws are used to secure mechanism. The mechanism is secured by special locking T^-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for reclining hardware, etc., have a double locking nut, which is nylon aircraft grade quality. All wood screws used are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to help keep the back straight and square.. -The seat springs used are 9 gauge Morley system no sag springs. Seat springs are tied together with tie wire to ensure that every spring works together as a seat unit. Seat springs are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most co