N-Tron 6 port unmanaged Ethernet switch four 10/100 RJ45 and two 100Base full duplex fiber port. The 106FX2 Industrial Network Switch is designed to solve the most demanding industrial communications requirements while providing high throughput and minimum downtime. All TX ports are full/half duplex capable, using "state of the art" Ethernet switching technology. It auto-negotiates the speed and flow control capabilities of the four TX port connections, and confi gures itself automatically. The two fiber ports are 100BaseFX fiber optic uplinks utilizing industry standard ST or SC duplex connectors. Since the TX ports of the 106FX2 are auto sensing, there will be no need to make extensive wiring changes if upgrades are made to the host computers, plant systems, or Ethernet I/O modules. The switching fabric simply scales up or down automatically to match your specifi c network environment. The N-TRON 106FX2 is an ideal candidate for upgrading existing hubs and repeaters to increase bandwidth and determinism by virtually eliminating network collisions. The product also keeps the network affordable, while maintaining the plug & play simplicity of a unmanaged hub. The 106FX2 can simplify plant wiring by eliminating the need to bring data acquisition and control network connections back to a climate controlled environment. To increase reliability, the 106FX2 contains redundant power inputs. LEDs are provided to display the link status and activity of each port, as well as power on/ off status. Extended operating environmental specifi cations to meet the harsh needs of the industrial environment. For cost savings and convenience the 106FX2 can be DIN-Rail mounted alongside Ethernet I/O or other industrial equipment. 330mA at 24V Input Current, 7.9 Amp/0.7ms at 24V Inrush. -40 to 70 degree C operating and -40 to 85 degree C storage temperature. 10 to 95 percent (non condensing). 0 to 10000 operating altitude. 35mm DIN-Rail.