Product Description

Specifications

Voltage: 12V DC

Flow capacity: 14 Litres per minute (3.7 Gallons per minute)

Self-priming - Max. lift 3M

Rugged bronze body and stainless steel shaft

Can be mounted in any position

Includes 2 x 12mm (1/2") brass hose tails Twin core wire Current Draw: 6 Amp (max. 10 Amp) Dimensions: Length 155.5mm x Width 119mm x Height 103mm

Approvals: CE

Turbocharger oil scavenging has always been an issue. You might have 50 psi feeding the turbo but the slightest restriction in the "drain" will immediately send oil past the exhaust seals, burning up oil and ruining your turbo.

In the case of remote mounted turbo systems, rear mounted systems, or in systems mounted below the engine oil level, some form of positive scavenging has to be engineered. That is where this pump comes into play.

This pump is a gear pump, the best kind of pump for oil scavenging.

Bronze gears. Brass pump body. No diaphragms to fail like our competitors pumps.

Gear design for maximum scavenge.

12v DC with splash resistant wiring. Two 1/2" barbed fitting included.

The same oil that it scavenges also lubes up its gears.

This is a racing part, please do not expect the product to be quiet.

These pumps are suitable for remote turbo systems as oil scavenge pumps. In this case the engine supplies

the oil pressure and the pump simply returns the turbo oil to a point above the sump level.

Can also be used for various other applications. (Oil transfer, water pump, etc)