Product Description

KeyTiger Part Number - KT3014-300-3015-03S.

Applications: Used as single-sided pull on glass/wood door or as a grab bar, towel bar, wardrobe clothes/tie hanger, kitchen cabinets, refrigerator & others. Each purchase comes in a SINGLE side.

Dimensions: Total length - 300mm / 12 inches | Center-to-Center Mounting Distance - 285/11.23 (MM/INCHES) | Diameter or Cross-section - 30|15mm or 1.18|0.59inches (Front|Side).

Projection: Gap of ~1.65" from surface of installation to beginning of the bar, measured from the neck.

Wall & Door Type: Mountable on all types of walls & doors. 3 pairs of mounting bolts provided for different door types for mounting to up to 3.2 inches door thickness. Also included are 2 decorative fittings to be used on opposite side of door if needed (not required to be used) as well as drywall anchors & wood screws for wall applications (towel, grab bar, closet).

Material: High-endurance Stainless Steel 304 alloy for rust, corrosion and stain resistance.

Instructions: Please refer to the detailed online published manufacturer's installation instruction (currently not provided in print with packaged product).

WARNING: Center distances between drilled holes REQUIRE an accuracy of 1/16". Mounting to studs REQUIRED when used as a grab bar. For door applications, will REQUIRE cutting of bolts to length to match door thickness using a hacksaw or dremel. NOT intended for back-to-back applications.

When used as door pulls, KeyTiger pulls do NOT LOCK by itself and are usually used in conjunction with deadbolts and/or door catches such as roller catches, magnetic catches, ball catches and others.