Product Description

2 Color UV Cure Repair Kit The BLUFIXX Starter Kit includes the BLUFIXX pen, TWO 7g cartridges(One Clear and One Black), the BluLight LED and a file Controlled use: The gel is cured when exposed to BLULIGHT LED rays. Easy to apply: no sticky fingers, no solvents! Suitable for almost all materials, e.g. stone, plastic, wood, metal, textiles and many others: Fill and seal cracks and holes in almost any material

Used for filling in and remodeling flaws in a material

Sealing-up seams and spliced wires

Repairing and binding without use of pressure (e.g. when making models)

So how does BLUFIXX work? No prior knowledge is necessary to apply BLUFIXX simply try it out and repair, design, model and unleash your creativity, however you please! 1. Make sure that the surface is free of grease; if necessary roughen it. To clean the surface, you can use isopropyl, acetone or pure alcohol.

2. Apply BLUFIXX as you wish. The maximum thickness should be 2mm. Thicker layers are obtained by applying and curing BLUFIXX several times.

3. BLUFIXX is cured by exposing the applied layer to light rays, up close, for a few seconds.

4. After curing, the material can be ground, drilled, varnished and polished.