Product Description

If you've ever towed a car, truck or boat or used a hitch-mounted carrying rack, you're probably familiar with the wobbling, rocking, banging, clanking and jerking that can come from sloppy/ill-fitting receivers and uneven loading. Our hitch tightener, which works for Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" or 2" will easily solve your problems. Easy-to-install, our hitch tightener works with a wide variety of trailers, racks, carriers, hitches, and ball mounts. Though our hitch tightener is not a conversion tool, it can be used to solidify the connection made when using one. If you are worried about bottoming out when pulling into certain areas, you can flip the hitch tightener over. PLEASE NOTE: You will need a 3/4'' deep socket or adjustable wrench to fully tighten the nuts when using the product. Re-tighten the nuts after every use to get the strongest hold at all times (a necessary evil to balance the tightest hold with an ability to still remove the hitch tightener). PROUDLY MADE IN THE USA!