Product Description

DipSize is clear liquid plastic that you can dip the bottom of your ring into. It coats the bottom of your ring in fast drying clear, soft plastic! Dip as many times as needed to achieve the desired size reduction. Simply dip your ring then hang it on the included hanger for 20-30 minutes between coats and about 6-8 hours (overnight is good) before wearing. DipSize is very smooth, reasonably durable and does not allow moisture or dirt between the ring and the ring guard. DipSize is by far the most comfortable ring sizing solution with the exception of RingShrinker (our newest product). Multiple coats increase durability. DipSize is also great for joining two or more rings together as an alternative to soldering. Simply bind the rings together at the top with thread or a binder clip then dip. DipSize can be removed by cutting with a razor knife and peeling it off. The DipSize jar contains enough for several applications to a ring or to size several rings. A DipSize treatment usually lasts 3-6 weeks of normal wear. To get the best performance and shelf life: Be sure to wash your ring with dish soap (non-lotion) and very hot water and dry completely before dipping, to ensure the DipSize will adhere well to your ring. Close the cap tightly when not in use to ensure that the DipSize stays fresh longer. DipSize can be thinned with Naphtha or MEK (Methyl Ethyl Keytone), both are available at most hardware stores. IMAGES AND CONTENT ALL RIGHTS RESERVED, PGC Inc.