The START International ZCM0800-WT electric tape dispenser with AC power adapter automatically cuts and advances predefined lengths of thin film tape for low to medium production of repetitive taping in industrial applications. The dispenser accepts tape rolls in widths from 0.25 to 1" (6 to 25 mm) with an outside roll diameter up to 5.3"/135 mm, and comes with 1"/25mm and 3"/76 mm roll core holders. A switch allows the operator to select from 3 preset cut lengths: 1.18"/30 mm, 1.77"/45 mm, or 3.54"/90 mm. The operator cuts the tape by pulling the tape up and over a serrated blade, which automatically advances the next length of tape. The ZCM0800-WT tape dispenser operates on three D-cell batteries (sold separately) or 115 VDC at 50/60 Hz (power adapter included). Specifications
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Tape dispensers hold and cut tape. They are used in manufacturing, assembly, and packaging. Tape guns are portable, hand-held tape dispensers that are useful for small jobs. Table-top dispensers allow an operator to tear off the tape and then bring it to the point of application. Manual table-top dispensers allow an operator to pull and tear any amount of tape, or to dispense a fixed amount of tape by use of a hand lever. Electronic dispensers may be actuated by the push of a button or by a sensor that detects when the previously cut length of tape has been removed. Most tape dispensers work with pressure-sensitive tapes, such as transparent office tape, packing tape, or strapping tape. Gummed tape dispensers, also known as water-activated tape dispensers, work with water-activated adhesive tape. These dispensers moisten each piece of tape as it is dispensed. START International manufactures tape dispensers, label dispensers, and optical inspection tools. The company, founded in 1981, is headquartered in Addison, TX. What's in the Box?