- 1:Cut in reverse weed, cut on the "dull" surface.

- 2:45/60 blade,

- 3:Our vinyl thickness is 110 Microns ,more thicker than Siser vinyl (which is 90 Microns ),so please set the knife a little deeper.

- 4:set the speed faster (at 50-75) for a large design, and at 25 definitely for a small one.

- 5:Preheat garment for 2-3 seconds

- 6:Temperature: 302F-320F (150C-160C),

- 7:Pressure: Firm

- 8:Time: 8-12 seconds

- Peel COOL, wait about 15 seconds

- For best performance, cover and reheat for 2-3 seconds.

Secret to the home iron...

1Make sure it's hot enough.

2Make sure your surface is HARD... can use a cutting board on a table.

3Make sure you can apply pressure to the iron. use YOUR body weight.

4Make sure to use a sheet of parchment paper or pillowcase,teflon sheet under your iron so that it doesn't drag. Iron on a hard surface.

5:Dry Heat is also important. You can check its adherence by lifting up a little corner of the carrier sheet. If not sticking, do again. Does take a little longer with regular iron.

Adheres to:

- 100 percent polyester

- 100 percent cotton

- Poly cotton blends

- Leather

Washing Instructions:

- Turn garment inside out.

- Machine wash COLD with mild detergent.

- NO bleach.

- Dry at a normal dryer setting on household machines.

- Do not dry clean.

- Instructions apply to the material only, please follow garment washing instructions as well.

Testing: Always test on a fabric swatch prior to production, especially on heavily treated fabrics.