Product Description

Designed for spots where clearance is tight, this X10 Pro compact screw-in lamp module is the ideal choice for use with table lamps, inside light fixtures and in places where you don't have enough space to use a standard X10 Screw-In Lamp Module.

The Screw-in Lamp Module is designed to control incandescent, non-dimming loads with an Indoor/Outdoor rating of between 40W and 150W. It memorizes it's X10 command code directly from the power line so there are no dials or wheels to set.

Note: Lamp Modules must not be used to control appliances or fluorescent lamps. The PSM04 is non dimming and has no Local Control Feature, however it DOES respond to "ALL LIGHTS ON/ ALL UNITS OFF."

Only 1 1/4 inches in diameter (it extends the bulb by about 1 1/4 inches) with a 3/8 inch bump on one side, this module will fit inside the cover of most wired-in light fixtures, such as ceiling lights with glass or plastic covers. And because it's small enough to fit under most lampshades, it's perfect for table lamps, too.