The MakerBot 1.75mm PLA True Purple Filament for 3D Printers (Large Spool) is a bioplastic derived from corn. It's promised not to have any heavy metals, phthalates, or BPA (Bisphenol A). The large spool provides 2 lbs (0.9kg) of PLA plastic filament.The

Adorama > Printers & Scanners

PriceZombie > Computers

MakerBot True Purple PLA Filament (Large Spool) Melting Point: 150-160eC (302-320eF) Compatible System: MakerBot Replicator 5th Generation Z18 3D Printer Weight: 2.0 lbs. / 0.9 kg

Newegg > Filament

PriceZombie > Computers

Made of highly pure resin, so your final product retains the quality you expect. PLA printed objects offer sharp corners and edges along with a glossy look and feel. Quality tested to help ensure consistency and avoid system down time. Long-duration testing uses a large 3D model (18 - 24 hours of print time) to ensure a consistent print job. Every filament color is tested at both high (100 micron) and medium (200 micron) layer resolutions on all MakerBot Replicator 3D Printers to verify that the filament will perform every feature that MakerBot apps offer and will reliably slice and print all types of models. Adheres well to acrylic and to MakerBot build plate tape for easy setup. PLA filament is designed to resist warping and curling, which allows you to print without a heated build plate. Nontoxic design helps ensure user safety. MakerBot PLA Filament Spool, MP05778, Large, True Purple, 1.75 mm is one of many available through Office Depot. Made by MakerBot.

OfficeDepot & OfficeMax > Technology > Printers, Scanners & Faxes > 3D Printers

PriceZombie > Computers

MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers. MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA. Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints. Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18.

Glass Temp: 60-65 C (140-149 F) Melting Temp: 150-160 C (302-320 F) Nozzle Temp: 230 C (446 F) Spool Diameter: 9 in Spool Width: 2 in Spool Hub Hole: 2 in Diameter 1.75 mm Net Weight: 2 lbs

MakerBot True Purple PLA Large Spool - PLA filament for Replicator 2 - MP05778