Product Description

MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers. MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA. Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints. Optimized for the MakerBot Replicator Mini. Also compatible with the MakerBot Replicator 2 and MakerBot Replicator (Fifth Generation).

Glass Temp: 60-65 C (140-149 F) Melting Temp: 150-160 C (302-320 F) Nozzle Temp: 230 C (446 F) Spool Diameter: 5.9 in Spool Width: 1.6 in Spool Hub Hole: 2 in Filament Diameter 1.75 mm Net Weight: 0.5 lbs.

Product Description

The MakerBot 1.75mm PLA True Red Filament for 3D Printers (Small Spool) is a bioplastic derived from corn. It's promised not to have any heavy metals, phthalates, or BPA (Bisphenol A). The small spool provides 0.5 lbs (0.22 kg) of PLA plastic filament.The

Product Description

Create freely with this MakerBot MP05789 1.75mm PLA filament, which is made from nontoxic resin for safety. Easy-to-use PLA material works well with a variety of uses, making the 3D printing process simple to learn.

Product Description

MakerBot True Red PLA Filament (Small Spool) Compatible System: MakerBot Replicator Mini Compact 3D Printer Weight: 0.5 lb. / 0.2 kg

Product Description

Made of highly pure resin, so your final product retains the quality you expect. PLA printed objects offer sharp corners and edges along with a glossy look and feel. Quality tested to help ensure consistency and avoid system down time. Long-duration testing uses a large 3D model (18 - 24 hours of print time) to ensure a consistent print job. Every filament color is tested at both high (100 micron) and medium (200 micron) layer resolutions on all MakerBot Replicator 3D Printers to verify that the filament will perform every feature that MakerBot apps offer and will reliably slice and print all types of models. Adheres well to acrylic and to MakerBot build plate tape for easy setup. PLA filament is designed to resist warping and curling, which allows you to print without a heated build plate. Nontoxic design helps ensure user safety. MakerBot PLA Filament Spool, MP05789, Small, True Red, 1.75 mm is one of many available through Office Depot. Made by MakerBot.

Product Description

MakerBot True Red PLA Small Spool - PLA filament for Replicator Mini - MP05789