Product Description

Dr. Tranny Kooler Kleen Flush Cleaner with Universal Tip is used, repackaged and designated by multiple car manufacturers and the largest transmission rebuilders. This is because it is the only mineral based transmission line flush. There is absolutely no water used in the formulation. Caustic water-based flushes leave behind a film of detergents and dispersants, water and soapy residue that will become part of the new ATF when the transmission is re-installed which can cause shudder and damage to clutch plates. Lubegard Kooler Kleen ensures the new ATF stays free of water and that the transmission is installed to last. Lubegard Kooler Kleen is a three-in-one product. Transmission rebuilders use it as a line flush cleaner, a wire harness cleaner, and a dielectric protectant. For use as a line flush cleaner: simply attach the connector to the transmission feed line; next, attach the hose to a transmission return line to collect flush and residue in a waste container; hold the can upright and actuate; flush until clear. For best results use the entire content of can per installation. Then turn the can upside down and continue cleaning with air only. For wire harness cleaner: cut off the hose to appropriate length to direct the stream. Spray over dirty depowered 6-12 volt electrical components. For a dielectric protectant: allow cleaned components to dry before repowering.