Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LEDs display primary or secondary power availability. Manufacturer: Tripp Lite Manufacturer Part Number: PDUMH20AT Manufacturer Website Address: http://www.tripplite.com Brand Name: Tripp Lite Product Model: PDUMH20ATNET Product Name: PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet Product Type: PDU Management: Management: Optional Automatic Transfer Switch (ATS) function enables setup for hot-swappable UPS maintenance bypass Dual UPS protection or dual AC input redundancy for critical single-corded network hardware Slot for optional SNMPWEBCARD accessory to enable remote individual outlet control over IP Physical Characteristics: Form Factor: Rack-mountable Physical Characteristics: Rack Height: 1U Package Contents: PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet PDU with attached L5-20P input power cord Detachable C19 to NEMA L5-20P 12 ft/3.6m power cord for optional secondary input Two NEMA L5-20R to NEMA 5-20P plug adapters User manual with warranty information Green Compliant: Yes
Tripp Lite's 120V 20A metered PDU system with Automatic Transfer Switching is a 16 outlet PDU with a digital display to indicate total PDU power consumption in amps.
Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Tripp Lite Single Phase Auto Transfer Switch, Metered PDU is one of many Power Distribution Units (PDUs) available through Office Depot. Made by Tripp Lite.
Tripp Lites 120V 20A metered PDU system with Automatic Transfer Switching (ATS) is a 16 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned-on at 250 milliscond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Supports 1U rackmount installation in a 2 or 4 post rack. Included are 16 NEMA 5-15/20R outlets, and two input power cords. Each cord is compatible with both NEMA 5-20R and L5-20R receptacles.
Tripp Lite PDUMH20AT Metered 1U 120V 20A 12 ft PDU with Dual-Input Auto Transfer Switching Dimensions: 1.75" x 17.5" x 14.5" Weight: 12.2 lbs. Output Frequency: 50/60Hz Output Watts (VA): 2400w Output Connector(s): 16 NEMA 5-15/20R Input Voltage: 120V Input Connector(s): 2 NEMA L5-20P with 2 NEMA 5-20P plug adapters Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS Complaint