Product Description

Halo's H7T is the fixture for you if you're looking for a larger aperture (six inches) for installation in non-insulated ceilings. Like most of Halo's recessed downlighting fixtures, the H7T is designed for ease of installation and flexibility across a variety of materials and situations. The hanger bars include pre-installed nails (self-tapping screws are also available) in special housings that ensure smooth, straight penetration, whether you're working with laminated composites, engineered I-joists, open-web joist plates, or even frozen lumber. The automatic leveling flanges allow you to hold the housing securely in place with one hand while driving nails with the other. The housing also includes integral T-bar clips for use with suspended ceiling T-grid systems.Halo also makes it easy to work in confined spaces. To install in joist spans of less than 12 inches, simply collapse the hanger bars then bend and break them along the score lines--no tools needed. The bars can also be removed and repositioned on the opposite side of the frame if you need to mount the unit at 90 degrees to the original configuration. Wiring is a breeze with Halo's patented Slide-N-Side wiring system, which allows wiring outside the junction box.Available with a variety of trim options (sold separately), some of which allow you to use low-voltage MR16 lamps. Note that, while this is not an IC-rated fixture, insulation may be placed around it as long as a three-inch space is maintained around the housing. UL damp-location and feed-through rated; CSA certified; IP rated. For remodeling projects, see Halo's H7RT.