Half & Full Duplex operation Transparent to 802.1Q packets Auto MDI/MDIX Missing Link and Smart Missing Link support Fiber Link Test function Multi-mode fibre (SC) up to
The AT-MC1004 media converter features a 1000Base-SX fiber optic port and a 1000Base-T twisted pair port. The fiber optic port has an SC connector and a maximum operating distance of 550 meters (1,804 feet). The twisted pair port has an RJ-45 connector and a maximum operating distance of 100 meters (328 feet). Controls/Indicators Status Indicators System LEDs: Power: Indicates power is applied to the converter Per Port LEDs: Link: Indicates a valid receiver link exists Receive: Indicates validation being received by converter Miscellaneous Package Contents One AT-MC1004 Series Gigabit Ethernet Media Converter Four protective feet (for desktop use only) External AC/DC power adapter Installation guide Warranty card Additional Information Rackmountable into the AT-MCR12 chassis- AC Power supply, US power adapter Maximum Current: 1000 mA External Power Supply: 100-120/220-240vAC, 50/60Hz +/-3 Transmitter Output Power (dBm): -4.0 to -9.5 Optical Wavelength (nm): 850 Minimum Receiver Sensitivity (dBm): -17.0 Certifications & Standards IEEE 802.3z-LAN IEEE 802.3ab-LAN EMI/RFI: FCC Class B EN55022 Class B Safety: UL 1950 CSA 950 EN60950 EN60825 Immunity: EN55024 Immunity Standard For state-specific electronic recycling and disposal information, please click here.
Allied Telesis AT-MC1004-10 Media Converter Device Type: Other Network Media: 1 x RJ45 Fiber Cable: 1 x Fiber Optic SC Max Distance: 1804 ft Parts: 1 year limited Labor: 1 year limited
Allied Telesis'' AT-MC1004 Gigabit Ethernet media converters extend the reach of Gigabit Ethernet networks through the use of multi-mode and single-mode fiber-optic cabling. By converting 1000T copper connections to 1000SX or LX connections, these Gigabit Ethernet media converters can extend segment lengths up to 10km. Although the provisioning of Gigabit Ethernet connections is becoming relatively inexpensive, thanks in part to the availability of lower-cost copper Gigabit network adapters, the distance limitations of copper cabling make fiber segments a necessity in most networks. Small, comparatively inexpensive copper to fiber Gigabit Ethernet media converters present a simple and very cost-effective way of connecting Gigabit Ethernet LANs over extended distances.To aid installation these media converters support an auto-sense MDI/MDIX port, allowing the media converter to connect directly with either a switch, PC adapter, or other Gigabit Ethernet device, using a standard cable. The AT-MC1004 Gigabit Ethernet media converters are powered by an external power supply for use in standalone applications. Where multiple media converters are used, up to 12 standalone devices can be inserted into the low-cost AT-MCR12 rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis. Allied Telesis AT-MC1004 Media Converter is one of many Networking Transceivers & Converters available through Office Depot. Made by Allied Telesis.