If you've purchased this item from a store (or used a credit card) that offers price protection,
PriceZombie can track its price and notify you if it falls within the protection time period so
you can get a refund of the price difference.
Add 2 USB 3.0 ports to your desktop computer through a PCI Express expansion slot. The PEXUSB3S2 PCI Express USB 3.0 card lets you add two USB 3.0 ports to your PC through a PCI Express slot. Featuring a native NEC PCI Express host controller chipset, the USB 3.0 standard supports transfer rates of up to 5Gbps, while still providing backward compatibility for older USB 2.0 (480Mbps) and 1.1 (12Mbps) devices. Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details. In addition to providing a much faster transfer rate the PEXUSB3S2 USB 3.0 card also supplies 900mA of power per USB port, allowing more and more external devices to operate without the need of an additional power source. Backed by a StarTech.com lifetime warranty and free lifetime technical support. Improved Performance with UASP UASP is supported in Windows® 8, Server 2012 and Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive. Manufacturer: StarTech.com Manufacturer Part Number: PEXUSB3S2 Manufacturer Website Address: http://www.startech.com Brand Name: StarTech.com Product Model: PEXUSB3S2 Product Name: 2-port PCI Express SuperSpeed USB 3.0 Card Produ
StarTech 2 Port PCI Express SuperSpeed USB 3.0 Card Adapter Model PEXUSB3S2 Type: PCI Express to USB Card External USB Ports: 2x USB Ports Standard: USB 3.0 Data Transfer Rate: Up to 5.0 Gbps Operating Systems Supported: Windows 2000/ XP(32/64bit)/ Server 2003(32/64bit)/ Vista(32/64bit)/ 7(32/64bit)/ Server 2008 R2 Features: Backwards compatible with previous USB standards Compliant with PCI Express 2.0 specs Fully compliant with USB 3.0 revision 1.0 specifications and Intel xHCI rev0.96 specifications Fully supports the following USB Communication Types: Control/Bulk/Interrupt/Isochronous Transfer Provides up to 900mA per USB port Support USB transfer speeds of 5Gbps (Super Speed), 480Mbps (High Speed), 12Mbps (Full Speed), and 1.5Mbps (Low Speed) Supports PCI Bus Power Management Interface Specification revision 1.2 Supports up to 127 USB devices connected to a single interface...
Disclaimer: The prices and availability displayed on PriceZombie are taken directly from the vendor's website or data feed. Some, but not all, vendors pay a small affiliate fee if you purchase their items through a PriceZombie link. Learn more. PriceZombie strives for accuracy, however the same price may not be available in your location. Heavily discounted items may sell out quickly. Always refer directly to the vendor's website to confirm prices.