Kool-It 96001 Supreme Coolant Treatment Kool-It 96001 Helps Engines Run Cooler Stray Electrical Current Can Cause Excessive Corrosion of Metal Componets Stray Electrical Current Can Cause Electrochemical Reaction That Will Produce Voids in Tubes Is pH, Electrolysis, Corrosion or Heat a Problem? Here's The Solution: Kool-It 96001 Supreme Coolant Treatment Kool-It Supreme Coolant Treatment is the only radiator treatment that has been endorsed, used, and approved by the largest radiator manufacturers and distributors. It's definitely not just a "water wetter". In fact, Kool-It Supreme Coolant Treatment out performs every other radiator protectant product to such a degree, that it remains in a class of its own. The National Automotive Radiator Service Association cites that the number one cause of roadside failure is coolant system related. Kool-It Supreme Coolant Treatment is chemically engineered to reduce the surface tension of the coolant, thus allowing it to more deeply penetrate metal surfaces at vital heat-transfer areas. This decreases operating temperatures and significantly reduces the possibility of engine overheating. Protect Your Investment with Kool-It Kool-It is the easiest and most cost effective way to protect a radiator or heater core from deterioration and damage that can lead to system failure. Kool-It provides the type of total cooling system protection required for today's modern cars and trucks and can extend coolant life up to five years. Compatible with all types of anti-freeze, Kool-It is very effective in preventing damage from electrolysis, corrosion, and pitting. The overwhelming majority of failures associated with aluminum radiators found in most newer vehicles are due to corrosion. This corrosion is a result of deficient chemical protection within the coolant. Directions For Use Never remove radiator cap if engine is still hot. With engine cool, pour Kool-It into radiator, start engine, turn heat on high, and run for 10 minutes. This opens the thermostat and circulates Kool-It through the entire system, providing full protection to the heater core, radiator core, water pump, cylinder heads, block, and intake manifold. Always maintain a minimum of 15% antifreeze in cooling systems of street driven vehicles with A/C. Ratio: One pint treats cooling systems of 12-20 quarts. Systems over 20 quarts add one ounce of Kool-It for each additional quart. Frequency: Add 1 pint every year or 30,000 miles, whichever comes first. After 5th consecutive year, drain, flush, and refill cooling system. Straight Water Applications: It is recommended that 50% more product be added in order to achieve full corrosion protection. Diesel Applications: It is recommended that twice the amount be added in order to achieve full nitrite protection. Benefits of Kool-It 96001 Supreme Coolant Treatment
