PDUMH30AT Metered ATS / Auto-Transfer Switch offers 120V 30A dual-input power distribution and visual current metering in a 2U horizontal rackmount installation format. Set of two NEMA L5-30P line cords enable separate primary and secondary input connections. Includes 25 built-in outputs (24 NEMA 5-15/20R and 1 L5-30R). Digital current metering with push-button display control tracks output power consumption in 4 segments: Bank 1 (12 upper 5-15/20R outlets), Bank 2 (12 lower 5-15/20R outlets), L5-30R (single outlet) and total PDU output. Supports 2U installation in 2 or 4 post racks, with additional support for wall-mount and under-counter placement. Tripp Lite's Metered ATS / Auto-Transfer Switch PDU Systems provide redundant-power and hot-swappable UPS options for network and server applications powered by a single input line cord. Separate PRIMARY and SECONDARY input line cords enable a redundant connection to two separate mains circuits. ATS systems will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within 3-6 milliseconds. ATS functionality is supported by any two compatible power sources, regardless of phase angle, to offer support for a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant dual-UPS protection when each cord is connected to a separate UPS system. In a dual-UPS configuration, the primary input cable must be supported by a full time sine wave online UPS. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility p...
Tripp Lite PDUMH30AT Switched, Metered 2U 100V, 120V, 127V 24A 10 ft. Power Distribution Unit Style: Rackmount Dimensions: 3.5" (2U) x 17.5" x 12.5" Weight: 13.8 lbs. Output Frequency: 60 Hz Output Connector(s): 24 5-15/20R & 1 L5-30R outlets Input Voltage: 100V, 120V, 127V Input Connector(s): NEMA L5-30P Front Panel LEDs: Primary and Secondary input connection. Digital current meter display shows the amount of power consumption in amps for entire PDU output.
PDUMH30AT Metered ATS / Auto-Transfer Switch offers 120V 30A dual-input power distribution and visual current metering in a 2U horizontal rackmount installation format. Set of two NEMA L5-30P line cords enable separate primary and secondary input connections. Includes 25 built-in outputs (24 NEMA 5-15/20R and 1 L5-30R). Digital current metering with push-button display control tracks output power consumption in 4 segments: Bank 1 (12 upper 5-15/20R outlets), Bank 2 (12 lower 5-15/20R outlets), L5-30R (single outlet) and total PDU output. Supports 2U installation in 2 or 4 post racks, with additional support for wall-mount and under-counter placement. Manufacturer: Tripp Lite Manufacturer Part Number: PDUMH30AT Manufacturer Website Address: http://www.tripplite.com Brand Name: Tripp Lite Product Series: Metered Product Model: PDUMH30AT Product Name: Metered PDUMH30AT 25-Outlets PDU Product Type: PDU Physical Characteristics: Form Factor: Wall Mountable Physical Characteristics: Rack Height: 2U Package Contents: Metered PDUMH30AT 25-Outlets PDU Installable Plug-retention Shelves Rackmount Installation Brackets Cable Ties Green Compliant: Yes Green Compliance Certificate/Authority: RoHS