Product Description

Specification: Size(approx): 195 x 40 x 40mm

Measure Range: 0-100%(0-10%)

Accuracy: 0.001sg(1%)

Salinity Proportion: 1.000-1.070sg How to use it: Open the cover plate, use the soft cloth carefully clean the detection prism

Getting several drops measuring solution and put them on the prism, slightly fold the cover plate to avoid produce the bubble, and let the solution fully cover the surface of prism

Then let the plate that receiver the light focus on the light source or brightness place

The eye observe the field through the eyepiece, rotating the eyepiece and adjusting handle to let the blue and white boundary become clear

The value of the boundary is the concentration of the solution

Revise and temperature correction

Under the environment of 20, you need revise before you use this product

Get the one drop of standard solution and paint on the blue detection prism, then cover the standard glasses blocks bright face on the solution, and screw the adjusting screw to adjust the boundary to the position 78.8% of the scale mark

Clean the detection prism, then you can measure the solution

If the measuring temperature is higher or lower than 20, use the temperature accuracy table, you can get the value in the then temperature environment to plus or subtract the temperature modification value, you will get the correct value. Note: 1.You should be careful during use it, you should use it as the introduction, do not detach the connecting parts, do not fall, do not crash, and strictly prohibit happening strenuous vibration

2.after use, strictly prohibit cleaning in the water, you should clean it with the soft cloth, and as for optical surface, do not scratch, crash it

3.Put this product in the place with the dry and without etchant gas

4.Avoiding the spare parts losing