When the Touch 'N Seal Foam mix is sprayed onto your walls, floors and ceilings, the shell of your home becomes protected. It's this protection that blocks heat gain in the summer and heat loss in the winter, thus preventing dramatic temperatures changes in the home. Correctly installed, insulation delivers comfort and lower energy bills during the hottest and coldest times of the year. In fact, if you seal air leaks with caulk before you insulate, you can save up to 20% on your heating and cooling*, as insulation works best when air is not moving through or around it. Portable, disposable and self-contained with color-coded, pre-connected hoses. Yields 600 board feet and provides a quick consistent flow of foam that dries in under a minute. Foam expands 30X. Touch N Seal Foam Kits are designed for use in commercial sealing, insulating, patching, and filling applications. Portable and disposable, these two-component foam systems provide a quick, consistent flow of polyurethane foam that dries in less than one minute. Yields 600 board feet or 600 square feet using a 1" layer (1 board foot = 12" x 12" x 1"), 50 cubic feet Specifications: Density (ASTM D-1622): 1.75 +/- 0.2 pcf K-Factor (ASTM C-518): 0.14 BTU/in/hr^-1/ft^-1/F^-1 R-Value (ASTM C-518): 7.12 per inch Compressive Strength (ASTM D-1621): 10% parallel: 19 psi, 10% perpendicular: 13.4 psi Tensile Strength (ASTM D-1623): 30 psi Dimensional Stability (ASTM D-2126): -40F, +.88% volume change; 158F, 100% RH, 2 Weeks: +14% volume change Water Absorption (ASTM D-2842); 1.0 - 3.5% vol Closed Cell Content (ASTM D-2856): 90% minimum Maximum Service Temperature for Cured Foam: 240F (116C) During colder months, it is extremely important the temperature sensitivity of 2-component spray foam. Variance outside of the recommended temperature range can drastically affect the performance of your foam kit. Please contact us with questions. This product requires special shipping handling.