Product Description

Ballast Dimmer - 0-10V Driver All your commercial dreams come true. The new INSTEON Ballast Dimmer is two products in one: A 0-10V control module for electronic dimming ballasts and a two-relay control module for traditional non-dimming fluorescent light ballasts. Installed alongside your fixture's existing fluorescent ballast, Ballast Dimmer adds INSTEON control and dimming to a wide range of commercial-centric fluorescent lighting. And the best part: Since INSTEON uses your installations existing electrical wiring for command and control, there's no need to tear up the walls or spend hours in (tight/awkward/precarious) spaces running new electrical wiring.Dimmable Shine with 32 Brightness Levels. Whether your goals are to conserve energy or to add a touch of dimmable elegance, the INSTEON Ballast Dimmer delivers both. Ballast Dimmer can dim electronic dimmable ballasts that respond to a 0-10VDC input signal. Depending on the electronic ballast, you may be able to smoothly dim your fluorescent lights as low as 3%, providing reduced power consumption when a room is unoccupied and helping to create atmosphere with reduced lighting levels.Dual-Relays Your two-for-one relay solution. No need for dimming? Ballast Dimmer can be configured to operate as a dual-relay switch for non-dimming ballasts, controlling two ballasts with a single module. Depending on your needs, you can use one ballast dimmer to vary the light output in a single large fluorescent fixture, powering only the lamps you need when you need them. Install a single INSTEON switch or keypad and let scenes provide your dim and bright illumination modes. And since Ballast Dimmer is installed per-fixture, your overhead lighting customization is sure to be unique.Commercial-Ready Ready for commercial buildings.. Many commercial installations need more than a single split-phase 120V supply can provide. That's why we've built in an auto-detecting, power supply that can handle input voltages from 100-277VAC at ...