This Interpower 83510031 fused four-function snap-in power entry module, in black, has an International Electrotechnical Commission (IEC) 60320 C14 power inlet, an electrical filter, and a switch. It has an international current and voltage rating of 4 amps at 250 VAC, and North American current and voltage ratings of 6 amps at 125 VAC and 4 amps at 250 VAC. This module has a thermoplastic housing for electrical and thermal insulation, and nickel-plated brass terminals for conductivity and resistance to corrosion. Its temperature range is -25 to +85 degrees C. The module has a built-in electronic filter that reduces electromagnetic interference (EMI) in the bandwidth range of 100 KHz to 30 MHz, a control switch, and accommodates a 5 x 20 mm fuse (not included) to protect the equipment in the circuit. It has a snap-in body for mounting to a panel with a maximum thickness of 1 to 2 mm, and three 6.3 mm quick disconnects for attaching conductors. The module measures 67.3 x 29.2 x 60.5 mm (W x H x D). (W is width, the horizontal distance from left to right; H is height, the vertical distance from bottom to top; D is depth, the vertical distance from front to back.) It has an Underwriters Laboratories (UL) 94 V-0 flammability rating, meets Restriction of Hazardous Substances (RoHS) requirements, and is certified by the Canadian Standards Association (CSA) for quality assurance. It is UL Recognized and marked for European Conformity (CE). This four-function snap-in power entry module is suitable for a range of electrical applications with a matching connector.Specifications