Without any wiring or even drilling, you can remotely monitor in real-time the Open/Close of your individual door or window from your smart phone, tablet or PC after you install Enerwave ZWN-BDS Z-Wave enabled Magnetic Door Window Sensor to home or business. After adding the sensor into your Z-Wave network, it can monitor any door or window. When the monitored window or door is opened, an alarm will be triggered. If the sensor is set to be armed from your pc, you can receive alert notifications from your smart phone, tablet and PC. This ideal home security sensor device can trigger more events such as automatically turn on or dim light, turn on music, fan, or set the thermostat when the Open of the door is detected. The magnet door window sensor includes two parts: Sensor unit and Magnetic Bar. When the door is opened, the magnet contact of the two parts is interrupted and the interruption is detected by the sensor, which will trigger the sensor and send a message to your smart phone, tablet, PC, or email if the sensor is set to be armed, same time it will trigger the events you already set through Z-Wave scene. ZWN-BDS, the Magnetic Door / Window occupancy and vacancy sensor can also directly trigger the ON/OFF/Dimming/Set of up to 5 Z-Wave associated loads including thermostat. ZWN-BDS can improve home security and energy efficiency. You won't leave lights on the whole day any more, as you can program the door close to trigger the lights OFF after a time delay. The ZWN-BDS is battery-powered and battery can last 1 year with low battery detection. With ZWN-BDS, Enerwave ZWN-BPC Z-wave Wireless Ceiling-Mounted Occupancy PIR 360 Degree Sensor, plus Enerwave ZWN-333 z-wave plugin receptacle, ZWN-323 Z-wave wireless dimmer switch. No wiring needed! Includes Duracell CR2 3V Lithium Battery, Model #: DL-CR2.

Amazon > Tools & Hardware > Categories > Electrical > Home Automation Devices > Modules

PriceZombie > Tools & Home Improvement