Note: Batteries not Included. Version 2.1 Firmware. One year factory warranty. Includes AC adapter.

Charge Mode: The rechargeable battery is charged up to its maximum capacity. The charging rate (current) can be independently adjusted for each battery.

Discharge Mode The discharge mode reduces the "memory effect". The rechargeable battery is discharged to a preset battery voltage (0.9v). Once the discharge is finished, the battery will be charged at the pre-selected charging current. Discharge current is always half of the selected charge current.

Refresh Mode: A rechargeable battery is charged and discharged repeatedly to optimize to its maximum capacity.

Test Mode: The test mode checks the present capacity of the rechargeable battery. The maximum capacity is determined by discharging the rechargeable battery after fully charged. If the maximum capacity is much lower than the rated capacity then it may be near its end of life.

Quick Test Mode: The charger will analyze the dynamic internal battery resistance by applying a load current, and measuring the current.

Display Modes:

Charge/discharge Voltage

Charge/discharge Current

Charge/discharge Time Elapsed

Charge/discharge Accumulated Capacity

Specifications:

Second Generation V2.1 Firmware

Operating Voltage: 12 Vdc

Power Adapter Input: 100-240V, 50/60Hz

Output: 12V DC, 1.5A

Charging Current range: 200 - 1400 mA

Discharging Current range: 100 - 500 mA

Max. Charging Capacity: 1 - 20,000mAh

Operating Temperature: 0 to 40 degC / 32 to 104 degF

Other Specifications:

Dimensions: 4" x 5.75" x 1.5"

Weight: 2.5 lbs