Product Description

1byone fog machine Using fire-resisting plastic materials, aluminum heater, faster heating. Compact, lightweight fog machine emits thick bursts of water-based fog to enhance any light show! Perfect collocation of 1byone fog machine and the stage lights! All take them home!

Specifications

Power Sources: Input AC110-120V 60Hz

Power Consumption: 1000W

Warm Up Time: 3-5 Minutes

Tank Capacity: 1300ml(0.35gal)

Fog Output: 3000CFM

Output Distance: 3M(9.8ft)

Outline Size: 412 x 211 x 202mm(16.22 x 8.31 x 7.95 in.)

Fuse: 10A, 125V

How to Use

Before using the fog machine, you have to prepare Fog Liquid(not included)

1.Put this product onto a clean, flat and solid surface, close to the power socket

2.Unscrew the lid on the tank by turning counterclockwise and pour the Fog Liquid inside. Do not spill Fog Liquid onto the product body. Do not overfill. If liquid gets into the Fog Machine, leave it to be dry completely before plugging in. Do not cut, pinch, or break the tube connected through the tank lid. Screw the lid clockwise to the tank tightly. Always make sure there is enough Fog Liquid in the tank before using the Fog Machine.

3.Connect the product with proper power socket

4.Warm up time is approximately 3-5 minutes. When fully heated, the Wired Control Indication Light will turn on and the Fog Machine will be ready to produce and spray fog.

5.Set the On/Off Switch to on position, nozzle will start spraying fog. Set to off position, spraying will stop.

6.Turn off the unit before refilling the fog machine