A kit of a 36" specially modified draft doorsweep to block sound from the door bottom. Includes the 1/4" tape needed to seal air gaps from around the door-frame: 25': A seal is essential to properly soundproof a door.

Our soundproofing seal is a 36'" metal strip and rubber loop, with sealed ends for added performance in creating a dead air space within the loop. You will also receive the screws to mount it to your door. Depending on if it's metal, you'll need to drill pilot holes, if wood you won't.

Usually, only a screwdriver and a few minutes is needed to install this very much needed attachment to block sound from coming from underneath your door.

Some more notes about our Soundproofing Door Sweep: (The part that should seal the door bottom against sound and that fits on the edge of the bottom of the door). Since our doorsweep only seals up to a 3/4" gap, if more than a 1/4" gap is left, a transom seal should be used from the hardware store that fits on the floor across the bottom of the doorway. Use this kind if you have a huge gap. Try to get one with a rubber flap. (Mechanical ones are expensive and will eventually fail).

A wood strip can also be used to extend the bottom of such "Cut Short" doors. We tell you how to do this! If your door width is less than 36", order B00GT15PCW if between 37" - 48" order B00GT18DN0 if between 49" - 60" order B00GT18IHQ and we'll cut to size for you!.

Amazon > Tools & Hardware > Categories > Hardware > Door Hardware & Locks

PriceZombie > Tools & Home Improvement