Product Description

TRIPP LITE APS1012SW 1000 Watt 12 Volt Inverter/ Charger Pure Sine Wave 120 Volt 4A/40A Hardwire Get Clean, Quiet, Reliable Backup Power Get a clean, quiet, reliable power source for tools, appliances, pumps, portable lighting and computer equipment with Tripp Lites APS1012SW Pure Sine Wave Inverter/ Charger. Unlike portable generators that rely on fossil fuels, this 1000-watt capacity Inverter/ Charger uses connected batteries to power equipment without noise and fumes. The APS1012SW also features OverPower and DoubleBoost capability for those heavy loads and power-hungry equipment start-ups where extra power is required. When an AC source is available, the inverter/ charger keeps the user-supplied batteries charged while simultaneously delivering conditioned, pure sine wave AC power to equipment. If an AC source becomes unavailable, the APS1012SW automatically switches to battery power for uninterrupted operation. Once an AC source becomes available again, the APS1012SW automatically switches back to conditioned, pure sine wave AC power. Designed for easy installations in homes, RVs, commercial and fleet vehicles, emergency vehicles, construction sites and remote worksites, the APS1012SW can also simplify operation with an optional remote control module, sold separately. The APS1012SW comes with a two-year product warranty and a rapid-response repair/ replacement policy thats unmatched in the industry. APS1012SW Feature Focus

View larger APS1012SW Close Up

View larger Industrial-Strength Sine Wave Output Encased in a rugged, moisture-resistant, powder-coated steel housing that withstands vibration, impact and high-humidity environments, the APS1012SW supplies computer-grade pure sine wave power to connected components. When connected to an AC source, the unit conditions the power before passing it to equipment. When using battery power, the APS1012SW efficiently converts 12V DC for any type of equipment, especially devices that require sine wave power for proper operation, like computers, servers, network devices, telecom hardware, variable-speed power tools, automated teller machines (ATMs), fluorescent lights, fans, digital clocks, laser printers, audio/ video equipment and all electronics with active PFC power supplies. Extended Peak Surge Power and Overload Protection Many tools, appliances and printers require extra power for start-up. Others devices, like refrigerators and pumps, have fluctuating power demands. When operating in inverter mode, the APS1012SW accommodates peak surge demands by providing up to 200 percent more output power than its 1000-watts continuous rating (1500 watts), so ample reserve power keeps tools and equipment running longer. In DoubleBoost mode, the APS1012SW can deliver 2000 watts to support energy-intensive equipment start-ups and motor cycling requirements. To prevent damage to the inverter and connected equipment, the APS1012SW shuts down automatically if an overload is detected at the AC output connection. Additional overload protection is provided by a 15-amp AC input circuit breaker, a 15-amp AC output circuit breaker, and a built-in two-speed cooling fan. Auto-Transfer Switching for UPS Operation and Versatile Extended Battery Configuration Options When the APS1012SW is connected to an AC power source, power is passed through to connected equipment while the battery set charges via a three-stage, 4/40-amp selectable charging system with adjustable settings for wet/ gel battery types. In the event of a power failure or severe voltage fluctuation, the APS1012SW responds with a near-instantaneous (16.6 millisecond) automatic transfer to battery power. Any number of user-supplied batteries may be connected to the APS1012SW to provide extended battery backup support for critical equipment. Simple Installation and Equipment Connection The APS1012SW features integral mounting slots for permanent installation on any rigid, horizontal surface, such as the bed of a pickup truck. Connecting the APS1012SW to a battery system is quick and easy with readily available user-supplied cables. A grounding lug connects the inverter/charger to earth ground or vehicle grounding system. AC input power and AC output power for connected equipment is provided via a hardwire junction box. Configuration dip switches support wet/ gel battery charging profiles; adjustable high voltage auto transfer during overvoltages; selectable AC low voltage auto transfer during brownouts; four levels of charger limiting relative to output load size; a battery equalization program and battery charger low/ high settings. APS1012SW Installation and Equipment Connection

View larger Optional Remote Control Capability The APS1012SW is equipped with an RJ45 port for connection of an optional Remote Control LED/ Switch Module (Tripp Lite model APSRMSW, sold separately), enabling users to control and monitor the inverter/ charger from virtually anywhere within a vehicle.

APS1012SW PowerVerter Inverter/ Charger: