Main

/

Auxiliary Repeater:

9 V

300 mA

DC adapter:

Input: 120 V

60 Hz 6.5 W

Output: 9 V

300 mA

Typical Power

Consumption

Main Repeater:

3.1 W

Test conditions: one LED on, Ethernet cable plugged in, powered by

the 9 V

adapter supplied.

Auxiliary Repeater:

0.6 W

Test conditions: one LED on, powered by the 9 V

adapter supplied.

Regulatory Approvals

DC adapter:

UL Listed for U.S. and Canada, NOM

Main

/

Auxiliary Repeater:

FCC, IC, COFETEL

Environment

Ambient operating temperature: 32 F to 104 F (0 C to 40 C),

0% to 90% humidity, non-condensing. Indoor use only.

Low-Voltage Wire Type

Two pair - one pair 18 AWG (1.0 mm

2

), one pair 22 AWG to 18 AWG

(0.5 mm

2

to 1.0 mm

2

) twisted shielded - NEC

Class 2

/

PELV cable.

Communications

Repeaters communicate with the system through RF. All devices

(except remote dimmers

/

switches) must be located within 30 ft (9 m)

of a Repeater. All Repeaters must be within 60 ft (18 m) of another

Repeater.

ESD protection

Tested to withstand electrostatic discharge without damage or memory

loss, in accordance with IEC 61000-4-2.

Surge Protection

Tested to withstand surge voltages without damage or loss of

operation, in accordance with IEEE C62.41-1991 Recommended

Practice on Surge Voltages in Low-Voltage AC Power Circuits.

Power Failure

Power failure memory: should power be interrupted, the Repeater will

return to its previous state when power is restored.

Mounting

Mount on a wall, ceiling, or level surface using the two #6 (M3) screws

provided.

Connections

Main Repeater:

Ethernet, RS232, RS485 and USB (Lutron use only.)

Auxiliary Repeater:

RS485

Warranty

1 Year Limited Warranty. http://www.lutron.com/resiinf

o