Tripp Lite DVI over Cat5 Passive Extender Wallplate Kit B140-101-WP Extender & Repeater Type: Wall Plate Extender Distance: up to 100 ft. at 1024 x 768 (60Hz) up to 50 ft. at 1920 x 1080 (60Hz) DVI: Connector A: 2 x DVI-I(Female) Other Connector: Connector B: 2 x 110(Female) LED Indicator: The LED on the local unit illuminates to indicate it is connected to, and receiving power from, the source. The LED on the remote unit illuminates to indicate it is connected to, and receiving power from, the monitor. System Requirements: Computer with DVI video card, and monitor with DVI input. Specification: Color: White Feature: 2 piece kit includes both local transmitter and remote receiver wallplates Extend a DVI-D Single-Link signal up to 100 ft. at 1024 x 768 (60Hz), or up to 50 ft. at 1920 x 1080 (60Hz), when using 24Awg, solid wire Cat5e/6 cabling. (Tripp Lite N022-...
The Tripp Lite B140-101-WP DVI over Cat5 passive extender kit is the perfect solution for those who need a wallplate solution that extends a DVI-D Single-Link signal up to 100 ft. from the source. When using 24Awg, solid wire Cat5e/6 cabling (Tripp Lite N022-01K-GY or N222-01K-GY), the B140-101-WP can extend a 1024 x 768 (60Hz) signal up to 100 ft, or a 1920 x 1080 (60Hz) signal up to 50 ft. Installation is quick and easy: simply punch down Cat5e/6 bulk cabling between the two wallplates, and connect the wallplates to the source and monitor using standard DVI-D Single-Link cables (Tripp Lite P561-Series). The signal will be sent with perfect video quality. Wallplates mount in standard in-wall electrical boxes or surface mount boxes. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Tripp Lite DVI over Cat5 / Cat6 Extender, Wallplate Video Transmitter and Receiver is one of many Photo / Video Cables available through Office Depot. Made by Tripp Lite.
The B140-101-WP is a DVI over Cat5 Passive Extender Wallplate kit, which comes with both transmitter and receiver units. It transmits a DVI-D Single-Link signal up to 100 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lites N202-Series). The B140-101-WP is compatible with all operating systems, and is plug and play, with no external power, software or drivers required.Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Installation is simple. Connect the transmitter unit to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the receiver unit to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the 110 punchdown jacks on the transmitter and receiver units are connected using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 50 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 100 ft.. Manufacturer: Tripp Lite Manufacturer Part Number: B140-101-WP Manufacturer Website Address: http://www.tripplite.com Brand Name: Tripp Lite Product Model: B140-101 Product Name: DVI over Cat5 Passive Extender Wallplate Kit Product Type: Video Console/Extender Technical Information: Connectivity Technology: Wired Video: Graphics Modes: Full HD Video: Maximum Video Resolution: 1920 x 1080 Interfaces/Ports: DVI In: Yes Interfaces/Ports: DVI Out: Yes Media & Performance: Media Type Supported: Twisted Pair Media & Performance: Twisted Pair Cable Standard: Category 6 Physical Characteristics: Color: White Package Contents: B140-101-WP Local Wallplate B140-101-WP Remote Wallplate 110 Punchdown Tool Wallplate Screws Owners Manual Green Compliant: Yes Green Compliance Certificate/Authority: RoHS